2x Cobal-SS w/Controller and accessories

Cobalt-SS 2 Pack – This pack contains 2x Cobalt-SS Above-Board Point Motors with “Plug & Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be powered by either DC or DCC systems. Operation is possible by DCC, conventional switches or both.

The pack also contains the following accessory leads and accessories:

1x Cobalt-SS Extension Cable (600mm) to enable one motor to be mounted further away from the Control Board.

1x Cobalt-SS Y-connection or reverse connection cable to enable two motors to be connected to one output on the Control Board.

Linkage pack – to connect your Cobalt-SS motor to your turnout.

Mounting screws – to install both the Cobalt-SS motors and the control boards.

Motors are 27mm x 14mm & 11mm high

Control Board is 115mm x 60mm & 25mm high