4% Incline/Decline Set 0-4" Rise 8

Description

Incline/Decline Sets are the ideal way to alter the elevation of your track quickly and easily. Each set includes the high-density foam pieces necessary to raise or lower the elevation of your track. Incline/Decline Sets come in either 2%, 3% or 4% grades.

Sets can start an incline at 0" and reach a maximum height of 4 1/2" (11.4 cm). Declines can start at a maximum height of 4 1/2" (11.4 cm) and lower to 0". Actual measurements depend on the grade used.

NOTE: One Set only includes foam pieces necessary either to create an incline OR create a decline. One Set cannot do both. You will need two Sets to create both an incline and a decline on your layout.

To install Incline/Decline Sets, pin in place with Foam Nails and attach with Foam Tack^™ Glue or the Low Temp Foam Glue Gun and Glue Sticks

High-density foam Incline Sets allow a smooth transition from one height to another.
To install, center Incline Set on your Risers, butt sections tightly, pin in place and attach with Low Temp Foam Glue or Foam Tack Glue.
Stack the pre-cut Inclines on top of Risers for quick and easy elevation changes.
Starters can be used alone or with sets to start your track on an incline.
Each piece is 2 1/2" wide x 24" long. 4 per set.
4% set elevates your track 4" in 8'.